|
|
(Click Here To View Explanation of Part Numbers) - [Click Here To View Foot Notes Page "(*)"]
 |
 |
Made of HYPER-FLEX™
Performance Polyurethane.
(A) Seals tight at tapered shaft
(B) Sharp edge helps seal-in lubricant
(C) Inside radius of boot works with rod socket
as a wiper
(D) Extra sealing lips
(E) Barrel shaped for a better fit |
 |
|
Ordering Examples:
If A measures .630" at the largest taper
and B measures 1.400" at the top of the socket
use-
PT# 9.13101R, round, red in color
PT# 9.13102G, octagon, black in color |
| |
NOTE: The rod
end must measure at least the minimum dimensions shown below or larger. Approximates
will do because of the elasticity of the product. The boot will seal better when
it stretches over a larger dimension tie rod.
In some cases you need to insert a thin, not sharp, object under the lip of the
boot to pull over area "B" of the tie rod end.
Remember, choose the part number (PT#) that has the dimensions closest to the
vehicle tie rod, yet it must measure larger than the minimums in the diagram below. |
| Minimum O.D. Dimensions Dimension A |
Minimum O.D. Dimensions Dimension B |
Style Round Shape |
Style Octagon Shape |
Buy |
| 31/64" or .472" or 12mm |
1 13/64" or 1.200" or 30.5mm |
9.13103 |
9.13104 |
|
| 19/32" or .590" or 15mm |
1 3/8" or 1.375" or 35mm |
9.13101 |
9.13102 |
| 9/16" or .550" or 14mm |
1 7/16" or 1.437" or 36.5mm |
9.13105 |
9.13106 |
| 21/32" or .650" or 16.6mm |
1 5/8" or 1.625" or 41.3mm |
9.13119 |
9.13120 |
Packaged 2 per peg board card for resale and 12 and 50
per box for installers.
| 2 Pack |
12 Box |
50 Box |
| 9.13101 |
9.13107 |
9.13113 |
| 9.13102 |
9.13108 |
9.13114 |
| 9.13103 |
9.13109 |
9.13115 |
| 9.13104 |
9.13110 |
9.13116 |
| 9.13105 |
9.13111 |
9.13117 |
| 9.13106 |
9.13112 |
9.13118 |
| 9.13119 |
9.13121 |
9.13123 |
| 9.13120 |
9.13122 |
9.13124 |
| |
|
|
|
